HomeBusiness5 Stand-out Features of Industrial HVLS Fans You Should Know

5 Stand-out Features of Industrial HVLS Fans You Should Know

Industrial HVLS fans are the most efficient and cost-effective way to cool large industrial spaces. Industrial HVLS Fans are designed to move large volumes of air at low speeds, resulting in improved air quality, better temperature control, and energy savings. This article will discuss seven stand-out features of Industrial HVLS Fans that you should know about. These features include their ability to save energy, reduce noise levels, circulate air evenly throughout the space, and more. Knowing these features can help you make an informed decision when purchasing an Industrial HVLS Ceiling Fan for your business or facility.

How Do HVLS Fans Work?

If cool air flows across the body, it damages the moist-saturated boundary layer and accelerates evaporation to produce cooling effects. When ceiling fans rotate inwards, they create an air column. The floor is where the air column flows down and out. The deep wall of horizontally moving air, referred to as the horizontal floor jet, will be proportional to the fan’s size and, to a lesser degree, the speed. When the floor jet is at its capacity to the max, it moves towards the outside until it meets an upper vertical surface, such as an edge wall.

A fan that has an 8-foot (2.4-meter) diameter can create a 36-inch (910-mm) depth floor jet when operating in optimal conditions. A fan with an overall size of 24′ (7.3 meters) produces the floor jet to be 108 inches (2,700 millimetres) deep and wide enough to wrap around a human sitting on the floor or a cow. That was the initial concept behind the design.

If the HVLS Ceiling fan’s air column downward is at its floor level, it rotates in a horizontal direction towards the columns in all directions. ” Horizontal floor jet” is the flow of air outward. Since the size of an air column is the determining factor for how high the jet, the larger diameter of the fan creates a larger air column and, consequently, a more robust floor jet. Smaller high-speed fans with the same displacement cannot produce the same result. The power needed to power a fan increases approximately in proportion to the square of the fan’s average speed of operation. Commercial fans that deliver air at 20 miles per hour (miles every hour) require 64x more power than a fan that provides air at 5 speeds (miles every hour). When it comes to cooling humans or animals, the combination of airspeed with”efficiency” in the form of “efficiency” implies that large, low-speed commercial fans have higher efficiency and efficiency than small high-speed ones.

These fans feature several distinctive characteristics that make them an ideal option for industry usage. They can transport large amounts of air at a lower speed, allowing for more air circulation and better temperature control than conventional fans. They also come with adjustable fan blades, allowing users to modify the fan’s settings to suit particular applications. In addition, they have sophisticated safety features, such as automatic shut-offs in case of an overload or obstruction. 

Additionally, they are simple to install and require little maintenance.

Industrial HVLS Fans provide several advantages that could improve the working environment in warehouses and factories and reduce energy costs. If you’re searching for an effective method of keeping your workplace safe and comfortable, These fans are worth looking into.

Features of Industrial HVLS Fans

The most efficient and energy-efficient HVAC control system is the HVLS ceiling fan. They use less energy to create airflow, which helps save the cost of heating and cooling. Industrial HVLS fans also move air with such efficiency that they complement, if not surpass, HVAC ductwork.

Reduced Cooling Costs

People are more comfortable as HVLS fans produce airflow since convective and evaporative cooling are assisted and not because the air temperature is more relaxed. The ability to cool indoor environments to ensure people’s comfort is the objective, and we can reach this goal with more options than just changing the temperature! It is possible to increase your thermostat while staying comfortably using fans to aid in the control of your climate.

Reduced Heating Costs

Ceilings that are high in height are prone to heat stratification. This is because there is cool air on the floor and warmer air in the ceiling, even if there isn’t any air circulation. The temperature increases by half a degree for every foot, so the difference in temperatures between floors and ceiling rafters in a 20-foot-high building could be as high as 10 degrees. In the winter, HVLS ceiling fans can operate in reverse, allowing them to destratify and distribute the air. This is particularly useful when you’re planning to utilize an air-conditioned heating unit as part of your air circulation plan. 

In addition to producing warm air at levels below and limiting heat loss through the roof, combining a heating unit with an HVLS fan can help save you up to 30% off heating expenses.

Decreased HVAC Tonnage & Ducting

HVLS ceiling fans have been charged with spreading air throughout an area when they are incorporated into the building planning process. Industrial HVLS Fans, as stated, efficiently mix air to create comfortable levels while decreasing HVAC demand. Integrating HVLS fan technology into the building’s structure could also aid in reducing the heating and cooling capacity required and eliminate the requirement for ductwork. Removing ductwork can reduce the need for space, labour and resources previously allocated to ducting management. Businesses can reduce the carbon emissions of their operations by reducing the dimension of the HVAC system using high-voltage fan technologies.

Additionally, using HVLS fans instead of venting is always effective because these big Industrial fans are used throughout the day, mixing air into the room and ensuring an even temperature instead of pouring cool or hot air into the space. Ducting is priced around the same as the HVLS Fans or fans. Therefore it’s worth weighing the advantages, not the least of which is how appealing a sleek fan’s design appeal can be compared to ducting made of metal and vents.

Improved Air Quality

The airflow pattern in low-speed, high-volume fans ensures that air gets to every corner of an industrial area, keeping the same temperature throughout, preventing stagnant or stale areas where the integrity of the product is a problem. It’s also more enjoyable for people working in the area.

Happier Workers

With pleasant, relaxed workers, Willis does not have to worry about employees’ morale or productivity issues because of a bad working environment. Industrial HVLS fans increase air quality and employee comfort all year long by generating cooling breezes in the summer months and circulating warmth throughout the winter. Studies show that comfortable workers are more productive and safer. Happier workers are also more likely to stay to leave, which can reduce costly and lengthy turnover. This could be the most compelling reason to look into Industrial HVLS fans in an industrial space.

The Bottom Line

Industrial HVLS ceiling fans offer an efficient year-round climate control option in your building. They can aid in increasing efficiency by covering a vast space with low power consumption, quiet feature, and a high volume of air. So, a fan was designed to move air. Therefore, ensure that the one you select can transport the air you need to circulate throughout your space.

Ghiselle Rousso
Ghiselle Rousso
I am a professional writer and blogger. I’m researching and writing about innovation, Blockchain, technology, business, and the latest Blockchain marketing trends.

Most Popular

Recent Comments